If you work with litigation documents, you have met Bates numbering: the sequential identifier stamped on every page of a production so that each page has one unique, citable name. Opposing counsel says "look at ABC-001234," and everyone knows exactly which page that is.
You can handle this directly in your browser with our free compress pdf tool — nothing gets uploaded.
Doing it wrong causes real problems: inconsistent numbers, numbers cut off at the edge, a production with a gap in the sequence, or a volume that doesn't reconcile with the index. None of these are hard to avoid if you do it in the right order.
Three parts, usually combined into one string: a prefix (often a party or case code), a number (zero-padded for sorting), and sometimes a suffix for attachments. ABC-000123, SMITH_000123, PL-0000123-01.
The two requirements that matter:
Federal and state practice rules do not prescribe a format, but they do require that the production be readily identifiable and that the index or privilege log references comply. Local rules and the discovery order sometimes add a format requirement — read them before you decide on the prefix.
This is where most mistakes happen. Do these in order:
Numbering before merging is the single most common cause of duplicate Bates numbers. If you merge two numbered documents, the number sequences interleave, and the production becomes impossible to reconcile.
Right-hand corner, bottom, is the convention in US practice. Some firms use bottom-center. Either is acceptable if consistent throughout the production.
Two placement traps:
Font size around 8–10 pt, plain, no styling, in a color dark enough to read when printed in black and white. Bates numbers are not decorative.
Attachments and exhibits. Attachments usually continue the same sequence rather than restarting, so each page still has a unique identifier. If a document has its own exhibit number, keep it as a *label* in the index rather than as a second stamp on the page.
Blank pages. In a production, blank pages often still get stamped so the sequence has no gaps. "Bates-stamped blank page" is a standard notation in an index. If you don't stamp them, you create a gap that looks like a missing page.
Existing numbers. A document that already has native page numbers will have both. That's normal and expected. Don't try to remove the original numbering — it often can't be removed cleanly and removing it rarely matters.
Very large productions. Past a few thousand pages, split into volumes and keep a running index of start numbers per volume. Number volumes sequentially, not independently, unless the order says otherwise.
After stamping, before sending anything:
"The numbers print on top of the page's own footer." Move the stamp inward or use the opposite corner. Overlap makes the page unreadable at the exact line that matters.
"Some pages have no number." Usually inserted pages added after stamping. Renumber from the insertion point onward.
"The numbers are cut off." Placed outside the printable area, or the recipient cropped the file to letter size. Move the stamp inside a safe margin and re-issue.
"Opposing counsel says page 500 is missing." Check whether an unstamped blank page was intended. If the sequence truly has a gap, that is a production defect and should be corrected with a corrected production and a note — not silently.
The prefix carries meaning. If it identifies a matter, a party, or a custodian, don't reuse it across unrelated productions, even for the same client. The prefix is part of the record, and changing it later means every citation in every filing is now wrong.
How do I enable Bates numbering in the browser tool?
Navigate to the PDF tool's main interface and locate the "Add Bates Numbers" or "Stamp" button in the sidebar. Click it to open the configuration panel. Ensure your PDF is uploaded. The tool uses standard web APIs, so no installation is required. Simply follow the on-screen prompts to proceed with the stamping process immediately.
Can I customize the starting number and format?
Yes. In the settings panel, you can define the starting number, suffix, and prefix. For example, set the start to 0001 and the suffix to "-ABC." You can also choose the font, size, and color. This allows you to match specific court requirements or firm standards. Preview the first page before applying to the whole document to verify the layout.
Where on the page do the numbers appear?
You can position the Bates number in any of the four corners or at the bottom center. Most tools offer preset positions. Adjust the offset values in pixels if you need to move it away from the page edge. This is crucial for avoiding overlap with existing signatures or headers in dense legal documents. Check the preview to ensure visibility.
Does the tool add numbers to images inside the PDF?
No. The tool stamps the Bates number as a text layer over the PDF page. It does not alter embedded images or raster graphics. If your document contains scanned pages, the stamp will overlay them. Ensure the text is not obscured by other content. The process preserves the original file structure while adding the numbering metadata layer.