You can handle this directly in your browser with our free pdf to images tool — nothing gets uploaded.
Submitting a paper receipt through a corporate expense portal may seem trivial, but a surprising share of reimbursement requests stall or get rejected because the uploaded image does not meet the finance team’s readability standard. Whether you are a freelancer claiming a business dinner or an employee filing a multi-day travel expense report, the difference between an approved claim and a bounced one often comes down to how the receipt was captured, named, and compressed before upload. This guide walks through each step so your next batch of receipts goes through on the first pass.
Most accounts-payable and finance departments work from a short checklist before they accept a receipt into the reimbursement system. The four items below appear on nearly every corporate policy manual.
The scan must show the entire receipt top to bottom, including the header with the vendor’s name and the footer with the total amount. A cropped image that cuts off the last line of the itemized list is the single most common reason for rejection, because the reviewer cannot confirm the total.
Even if you have a duplicate itemized list in a spreadsheet, the reviewer needs the original paper document to cross-check the transaction date, the exact vendor name as it appears on the receipt, and the final total including tax. Blurry text at 72 pixels per inch is usually too low; 300 DPI is the practical minimum.
In many jurisdictions the tax breakdown (sales tax, VAT, GST) is required for deductible or reimbursable expense validation. If the tax line is under a fold or hidden behind a coffee stain, the reviewer may flag the claim for a written explanation, which delays payment by a full cycle.
A thumb pressing down on the bottom corner, the shadow of your hand cast by a desk lamp, or a second receipt stacked underneath all reduce legibility. Hold the paper flat, use even lighting, and place the receipt on a neutral matte surface to avoid reflections.
Grabbing your phone and snapping a quick photo in the parking lot is the default habit, and it is also the default reason receipts get returned. Several physical and software factors make phone photos unreliable for expense claims.
Most modern receipts are printed on thermal paper, which has a glossy, slightly waxy surface. A phone camera without polarized lens correction picks up the overhead fluorescent glare as a bright white patch across the centre of the receipt, washing out the itemized lines. The result is an image where the top and bottom are readable but the middle—where the line items and tax line sit—is blown out.
Thermal receipts curl at the edges within hours of printing, and by the time you file your expense claim a week later the paper often looks like a loose spiral. A phone camera shooting from above captures that curl as a perspective distortion: the left edge is sharp and the right edge falls away into the background, making the right-column numbers unreadable.
The phone’s auto-focus and auto-crop sometimes trim the bottom two centimetres of the receipt, which is exactly where the grand total and transaction timestamp sit. On top of that, phone cameras default to saving 2-to-4-megapixel JPEGs with heavy compression artefacts; small tax-line text vanishes into the noise.
Many expense portals accept only black-and-white or grayscale scans when the upload form specifies a monochrome file. A full-colour JPEG of a receipt that the system expects in grayscale can trigger an automatic rejection, or the reviewer may spend extra time converting it by hand.
The default assumption—scan everything in colour because it looks nicer—is not always the best choice. The right mode depends on the paper type and what the finance team needs to read.
If the receipt contains coloured logos, security watermarks, or printed stamps (a company seal, for example), colour preserves those details and can help the reviewer verify authenticity. For a standard thermal receipt with only black ink on white or cream paper, colour adds no useful information and inflates file size by 30 to 50 percent compared to grayscale.
Grayscale captures the full range of ink density without the extra channel data of colour. It is the recommended default for most expense-portal uploads: the text remains sharp, the file is smaller than a colour JPEG, and it satisfies the “monochrome” requirement of many forms.
High-contrast black-and-white mode is useful when the receipt is printed on a light-coloured paper and you want to force the text to pure black for maximum legibility in a document scan. The risk is that thermal receipts fade over time—the ink chemically breaks down and a line that was dark last month may be a faint grey now. A black-and-white threshold scan of a faded receipt can erase the lighter characters entirely. In that case, stay in grayscale so the faded ink is preserved as a light-grey tone rather than being pushed to white.
A well-organized set of receipts makes the reviewer’s job faster and reduces the chance that a single missing file stalls the whole batch.
If you are claiming a single taxi fare or one hotel bill, upload the receipt as its own file. A clear file name removes ambiguity. A practical naming convention is:
YYYYMMDD_VENDOR_CATEGORY_AMOUNT.ext
For example, 20260814_AcmeTaxi_MetroAirport_42.50.pdf. The date, vendor, category, and amount are all visible in the file list without opening the document.
When you are submitting a multi-day trip with twelve receipts, a single combined PDF ordered by date keeps the reviewer from juggling twelve separate downloads. Name the file with the trip identifier and date range, for example 202608_TripLondon_20260812-20260816.pdf. Inside the PDF, each receipt gets its own page, and you can add a one-line header at the top of each page stating the date and vendor. Most expense portals accept a combined PDF up to a stated size limit; check the portal’s help page before you merge.
Most corporate expense portals cap a single upload at 2 MB or 5 MB. A colour JPEG scanned at 600 DPI can easily exceed that for a single receipt, and a combined PDF for a ten-receipt trip can push past 10 MB if every page is a high-resolution colour image. Staying under the limit is less about compressing the image and more about choosing the right settings from the start.
For a standard 80 mm-wide thermal receipt, 300 DPI grayscale produces a file that is typically 150 to 400 KB, well under the 2 MB single-file cap. A 215 mm-wide A4 receipt at the same resolution and mode lands around 500 KB to 1 MB. Both are comfortably inside most portal limits.
If you combine ten receipts into one PDF and the file is 8 MB, do not rescan at 150 DPI—the text gets mushy. Instead, open the PDF in a compressor (most office suites have a built-in “optimize PDF” feature) and select a standard-compression level targeting 200 DPI equivalent. The visual difference for receipt text is negligible, and the file drops to 2 to 3 MB.
If a trip generates twenty receipts and the combined PDF is 9 MB even after compression, split it into two files: 202608_TripLondon_Part1.pdf and Part2. Upload both against the same expense line item and reference both file names in the notes field.
A receipt that has sat in a wallet for three months, been run through a dishwasher, or been folded into a car cupholder is not a clean scan, and pretending otherwise—by applying heavy image-editing filters to darken faded ink—can get the whole claim flagged for irregularity.
Do not discard the paper receipt. Many finance teams will ask to see the original if the digital copy is questionable. If the receipt is torn, tape the pieces together on the back with clear archival tape, scan the whole thing in one pass, and note the tear in the expense form’s description field.
If a section of the receipt is faded and barely visible, type a short note in the remarks or attachment-description field of the expense portal: “Bottom tax line partially faded; total confirmed from credit-card statement, attached as second file.” Then attach your bank or card statement as a corroborating document. The reviewer needs to see that you have not altered the receipt image.
If you are tempted to run the scan through an image editor to boost contrast or sharpen the faded text, send a quick email to your finance contact first: “Receipt from 12 Aug is faded; is it acceptable to apply a contrast boost and attach the enhanced version alongside the original scan?” Most teams will say yes, and the written permission protects you if the claim is audited later. If the team says no, attach the original scan as-is with the written note.
If you are scanning the receipt yourself rather than using a dedicated document scanner, the curl problem is yours to solve before the image is captured. A curved thermal receipt photographed from above will have the right edge fall into shadow and the numbers on that side will be out of focus.
Lay the receipt face-up on a flat matte surface (a piece of cardboard or a white folder works well). Place a thick hardcover book—a novel, a dictionary, anything with a flat bottom—gently on top of the receipt so the weight presses the curled edges down. Let it sit for thirty seconds to a minute; the thermal paper will relax into a flatter shape without the pressure creasing it.
Do not let the receipt sit unweighted for long after you remove the book, because the curl springs back. Have your phone or scanner ready. If you are photographing, use the phone’s document-scan mode if available; it corrects perspective and strips the background. If you are using a flatbed scanner, the lid pressure does the flattening for you, so the book step is only needed if you are using a handheld or overhead scanner.
Do I need to scan the back of the receipt?
Only if the back carries a handwritten signature, a tax-invoice number, or a cancellation mark. Otherwise the front is sufficient. If the back has information that proves the transaction was completed, scan it as a second page in the same PDF so both sides stay linked.
Can I use a screenshot of the receipt from an email as my attachment?
Technically yes, but it is a weak submission. A screenshot of an emailed receipt is a lower-resolution JPEG, often cropped, and the reviewer may request the original paper scan. Use it only as a supporting document alongside the actual receipt scan.
How long should I keep the original paper receipt after my claim is approved?
Most corporate policies ask employees to retain paper receipts for at least one to two years after reimbursement, in case of an internal audit or a tax-authority review. Check your company’s expense policy; if it states a specific retention period, follow that. Store the receipts in a labelled envelope or a physical folder grouped by month so they are easy to pull if requested.
Related reading: annual review scan reconcile paper records, batch ocr scanned pdfs, car repair records scan before selling.
Can I scan receipts directly without printing first?
Yes. Open the browser tool, click 'Upload', and select your receipt image from your device. The tool processes JPG, PNG, or HEIC files directly. No printing or physical scanner is needed. Ensure the image is clear, well-lit, and not blurry to guarantee accurate text extraction for your expense claim.
What file formats are accepted for upload?
The tool accepts common image formats including JPG, JPEG, PNG, and HEIC. If you have a multi-page document, combine pages into a single image or upload them separately. PDFs are not supported for direct scanning because this tool is designed to convert new physical or digital images into structured data, not to parse existing PDF files.
Does the tool extract all line items and totals?
Yes. It uses OCR to identify vendors, dates, currency, line items, and final totals. After processing, review the generated fields. If small text is missed, zoom in on the original image and check the 'Details' section. Manually correct any errors in the export form before submitting your expense claim to your accounting software.
Is my receipt data stored on the server?
No. All processing happens locally in your browser using web-based OCR engines. Your images and extracted data are not uploaded, stored, or shared with any third-party server. Once you close the tab or clear your cache, the data is permanently deleted from your device, ensuring strict privacy for sensitive financial documents.