You can handle this directly in your browser with our free compress pdf tool — nothing gets uploaded.
You print a PDF and the output has a white strip down one side, or the bottom line of every page is clipped, or the document comes out at 92% of the size it should be. The file looks fine on screen. The printer is working. What happened is that the file's page size and the printer's paper size don't match, and the software made a decision on your behalf.
This is a page geometry problem, and there are exactly three things you need to know: what size the PDF actually is, what size the printer expects, and which scaling rule is being applied between them.
Letter is 8.5 × 11 inches (216 × 279 mm), standard in the US and Canada.
A4 is 210 × 297 mm (8.27 × 11.69 inches), standard almost everywhere else.
They are close enough to look interchangeable and different enough to cause problems. A4 is narrower and slightly taller than letter. Print an A4 PDF on letter paper without scaling and you lose about 12 mm (half an inch) off the right side and gain a strip of blank paper at the bottom. Print a letter PDF on A4 and the opposite happens — the last line can drop off the bottom.
Print dialogs offer a handful of scaling options, and the labels are inconsistent between vendors:
That "shrink to fit" default is the trap. It quietly rescales the whole document, which shifts a footer that was positioned in absolute terms, moves text closer to the binding edge, and can make a page that exactly filled the sheet now sit with a visible margin.
Every PDF viewer can tell you. In most desktop readers: File → Properties (or the document info panel) shows page size in mm or inches. Preview apps often show it when you open the page settings.
The number to look at is the *page box* size, not "fit to view." A PDF page measured as 595 × 842 pt is A4 (that's 210 × 297 mm in points). 612 × 792 pt is letter.
If pages differ from each other inside one file, check where — a PDF built from mixed sources often has a letter cover and A4 body, which prints with one page misaligned and everything else fine.
You need to send a US-standard file to a US recipient. Convert the page size to letter and reflow content. Cropping is not the same thing — cropping changes the visible area but leaves the underlying page as A4, and the recipient's printer will still see A4.
You need to print an A4 file on a letter-only printer. Use "fit to page" (not shrink) so nothing is clipped, and accept the small white strip. Check that page numbers and footers are still inside the printable area.
You are printing a form someone will fill in by hand. Do not scale. Print at 100% on the exact paper size, or the fields won't line up with a physical template. If the printer lacks A4 paper, fix that rather than scaling.
You are printing something that must be exact size — a label, a template, a drawing to scale. Set the printer to 100% and disable "scale to fit" explicitly. Then verify with a ruler on the first page.
You have a mixed-size PDF. Split it into groups by page size, convert each group, and merge — or set the printer to "choose paper source by page size" and load both trays.
Even with matching paper sizes, most printers can't print to the very edge. The typical unprintable margin is 3–5 mm, more on cheap inkjets. Any content within that margin gets clipped regardless of page size — and this is what causes "the last line is missing" or "the text is touching the edge" even when the sizes match.
Two fixes: shrink the content very slightly (fit to *printable area*, not to page), or move the content inward before printing. For a document you're re-issuing, moving it inward is the correct answer.
Page size mismatch is not a printer malfunction and not a file defect. It is a unit conversion happening silently at print time. Check three things in order — PDF page size, printer paper setting, scaling rule — and you'll resolve it in under a minute. If the file must remain unchanged for someone else, hand it over without scaling and let them choose, rather than flattening it to your local paper size.
Related reading: batch compress folder of pdfs under size limit, batch rename pdfs by size limit, compress large pdf on iphone without app.
Why does my Letter-sized PDF shrink on A4 paper?
Your PDF has fixed US Letter dimensions (8.5x11 inches), but A4 is slightly narrower and taller. Most printers default to 'Fit to page' when paper sizes mismatch. This shrinks content to fit width, causing uneven margins and distorted aspect ratios, making text appear smaller than intended on the final printout.
How do I force exact 100% scale instead of auto-fit?
In your browser's print dialog, locate the 'Scale' or 'Page Sizing' option. Change it from 'Fit to printable area' to 'Actual size' or '100%'. Be aware that content may overflow or cut off if the document exceeds physical paper boundaries, so verify margins beforehand to prevent lost data.
What is the 'Shrink-to-Fit Trap' and how to avoid it?
This trap occurs when automatic scaling reduces content to fit smaller paper, creating large empty margins and unreadable text. Avoid it by explicitly setting scale to 100% or using 'Fit width' only if necessary. Always preview your document digitally before printing to ensure critical elements remain legible and positioned correctly on the target paper size.
Can I convert Letter PDFs to A4 without distortion?
Yes. Use a PDF editing tool to change page dimensions to A4 (210x297mm). If scaling is required, select 'Preserve Aspect Ratio' to avoid stretching. Alternatively, adjust margins in the original document design. Converting dimensions ensures consistent sizing across different regional paper standards, preventing unpredictable printer scaling behaviors during the print process.